We hope you have enjoyed the SRGC Forum. You can make a Paypal donation to the SRGC by clicking the above button

Author Topic: Trough making  (Read 36376 times)

Jupiter

  • Hero Member
  • *****
  • Posts: 1409
  • Country: au
  • Summers too hot, too dry and too long.
    • https://www.flickr.com/photos/jstonor/
Re: Trough making
« Reply #15 on: June 22, 2016, 12:13:28 PM »

Thanks Maggi, My Dad found me some nice tufa rock so we'll see how I go building it up and getting it ready for planting. Now all I need are a dozen or so nice saxifrages! I have some germinated from SRGC seed, but I'll have to be patient if I use those wee babies. (Scottish vernacular)
Jamus Stonor, in the hills behind Adelaide, South Australia.

https://www.flickr.com/photos/jstonor/

Maggi Young

  • Forum Dogsbody
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 44770
  • Country: scotland
  • "There's often a clue"
    • International Rock Gardener e-magazine
Re: Trough making
« Reply #16 on: November 14, 2016, 05:04:22 PM »
Jan Tholhuijsen in the Netherlands  is very good at devising projects to give him great planting opportunities - several have already been shared in the International Rock Gardener e-magazine - he has been working on the instructions for his latest idea which is for a different type of polystyrene trough -

"This time I get the trough on the workbench,normally on the floor is easier  but there is not enough light on the floor for filming.
 Covering the trough with the soaked  cotton cloths (tea towels) is not difficult, but requires some skill and knowledge. Therefore,  I hope this video will help.
 This is my first video with moving images made with my photo camera which includes this function. So do not pay attention on the quality. What matters is that you get an idea, how to apply the (tea) towels.
 First, with a brush, “paint” the trough fully with a cement porridge. This is to assist the bond the coating to the (tea) cloths.
 Wearing good  protective gloves, moisten the  cotton tea towels and  soak/coat them well with cement porridge. Make sure the bottom of the trough on the outside is flush with the bottom of the cloth.
 With any remaining cement porridge, coat the bottom of the trough.
 After 2 days you are able to restore / repair the exterior of the trough with cement porridge on any  bad pieces.
 After 3 days I again  lubricate the outside with a thin cement gruel
 When that is dry,  turn the trough over and smear the outer base with a layer of a half a centimeter cement paste. This has to be a thicker paste so that it does not flow.
 The coating achieved with these paintings is very strong. my 3 meter trough is so lined and now he goes in the second winter. ...................
 Anyone can create a trough in this way. While you're afraid of the winter you can do bubble wrap against the inner sides."
 Costs
 A pack XPS € 44.50
 3 tubes of adhesive € 36.00 for 4 troughs (2x100cm-1x125cm-1x175cm)
 Long screws for extra pressure € 22.00 (you can reuse every time)
 2 Portland cement € 10.00
 Little peat and sand, and plastic on the floor. (Tea) towels cost? 
 The film takes too long ? just scroll to the next.

read more here :
https://drive.google.com/file/d/0B8wSWiwm_WABUHdTN05Ub2VOcHM/view

and see  this video here:

« Last Edit: January 06, 2017, 06:29:02 PM by Maggi Young »
Margaret Young in Aberdeen, North East Scotland Zone 7 -ish!

Editor: International Rock Gardener e-magazine

Maggi Young

  • Forum Dogsbody
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 44770
  • Country: scotland
  • "There's often a clue"
    • International Rock Gardener e-magazine
Re: Trough making
« Reply #17 on: January 05, 2017, 01:25:29 PM »
Jan  has decided that his  articles and videos are not enough - he's made an e-book of  ideas  for  garden projects -  read it here  https://issuu.com/jantholhuijsen/docs/practical_projects_for_the_rockgard
 Tremendous ideas to keep anyone busy - and great that Jan is  following the SRGC idea of making things free to  all whenever possible!
Thanks Jan!!
Margaret Young in Aberdeen, North East Scotland Zone 7 -ish!

Editor: International Rock Gardener e-magazine

Ross McLeod

  • Newbie
  • *
  • Posts: 12
  • Country: au
Re: Trough making
« Reply #18 on: August 30, 2017, 01:01:41 AM »
What a fantastic resource for the budding rock/crevice gardener. Glad I found this SRGC site Maggi before I get too far into our project. Trying to avoid the pitfall that happens when expectations become resentments under construction.

 :)

Jan Tholhuijsen

  • Full Member
  • ***
  • Posts: 109
  • Country: nl
Re: Trough making
« Reply #19 on: September 09, 2017, 03:49:27 PM »
Quickly make a few (small) troughs, see the YouTube video.


Anyone can do this and the price no more than a bag of concrete mix

Photos the troughs are ready to plant.
You are never to old to learn.

ashley

  • Pops in from Cork
  • Hero Member
  • *****
  • Posts: 2850
  • Country: ie
Re: Trough making
« Reply #20 on: September 09, 2017, 08:37:11 PM »
Thank you Jan; this is excellent 8)
Do you find 18-19 cm the ideal depth, and how do you recommend treating the outer surface to make the trough look 'weathered' or natural as quickly as possible?
Ashley Allshire, Cork, Ireland

Jan Tholhuijsen

  • Full Member
  • ***
  • Posts: 109
  • Country: nl
Re: Trough making
« Reply #21 on: September 09, 2017, 10:50:40 PM »
Thank you Jan; this is excellent 8)
Do you find 18-19 cm the ideal depth, and how do you recommend treating the outer surface to make the trough look 'weathered' or natural as quickly as possible?

You can change the depth by placing the slats as a crevice and building higher ones. With these troughs it is raised to the center by 15 cm. To make the outside 'natural'. I do not attach such value to that. The sandstone troughs we had in Czech were 100-150 years old and were always in the stable. When we put them outside, the troughs with shadow got some mosaic growth, not in the sun. These troughs have a slanted side, so always a little shadow. Just put out and the look comes by itself.
You are never to old to learn.

Jan Tholhuijsen

  • Full Member
  • ***
  • Posts: 109
  • Country: nl
Re: Trough making
« Reply #22 on: October 30, 2017, 12:04:37 PM »
I had made some old stuff a mold. And traditionally made a trough.
90 - 35 - 22 cm.

Made of concrete mortar. This is very strong. No peat or other surcharges.
The inside is round. Original troughs made of sandstone were also around inside. This was because no food remains could be left in the corners.
This is also good for troughs filled with soil and plants. At freezing, the grunge freezes upwards, instead of sideways.
The original troughs also had no extra steel reinforcement. But had extra thickened walls. These are all benefits to be able to stand outside in the frost.
This concrete trough is also so made, without reinforcement, round inside, thick walls and no peat or other additives.
Of course he has to prove himself.

90 kg of mortar is used. One is enough, pffff. The lightweight troughs are easier to handle.

Also see: https://drive.google.com/file/d/0B8wSWiwm_WABZ29ub1cwWmRzNEU/view?usp=sharing

Or http://www.srgc.org.uk/logs/logdir/2017Sep281506621414IRG93.pdf

« Last Edit: October 30, 2017, 12:18:32 PM by Jan Tholhuijsen »
You are never to old to learn.

Jan Tholhuijsen

  • Full Member
  • ***
  • Posts: 109
  • Country: nl
Re: Trough making
« Reply #23 on: January 10, 2018, 11:57:33 AM »
The 7 lightweight troughs I made last weeks. All of them have been sold for a small price to rock planting enthusiasts. Members of the VRV and NRV. (I have enough myself)
It was fun to make them again. That's how you come through the winter.
The finish is improved again. The cement pudding has changed, there is now rough river sand through. The exterior is then coarser. Then smeared with cement / peat / clay mixture. This is to stimulate algae / moss.
If you want to make it, start now, nice to make in the winter. In the spring they are ready to plant.

Description  https://drive.google.com/file/d/0B8wSWiwm_WABZ29ub1cwWmRzNEU/view?usp=sharing

600777-0

600779-1

Detail of the exterior

600781-2

600783-3


« Last Edit: January 10, 2018, 03:46:37 PM by Jan Tholhuijsen »
You are never to old to learn.

Maggi Young

  • Forum Dogsbody
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 44770
  • Country: scotland
  • "There's often a clue"
    • International Rock Gardener e-magazine
Re: Trough making
« Reply #24 on: January 10, 2018, 12:53:27 PM »
The  adjustment of the method is giving a very good rough finish, Jan.
Margaret Young in Aberdeen, North East Scotland Zone 7 -ish!

Editor: International Rock Gardener e-magazine

brianw

  • Hero Member
  • *****
  • Posts: 810
Re: Trough making
« Reply #25 on: January 26, 2018, 08:40:47 PM »
The following used (food delivery) polystyrene boxes are being offered on my local Freegle.

1  len 49cm  Width  23cm  Depth  13cm  wall thickness  4cm

2        49cm              23cm              20cm                        4cm

3        35cm              26cm              25cm                      2cm

Any interest in my area?  SL8. They are actually in HP14 I think. The height presumably includes the lid, so the bottom alone will be shorter my maybe 5cm or so.
Edge of Chiltern hills, 25 miles west of London, England

Maggi Young

  • Forum Dogsbody
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 44770
  • Country: scotland
  • "There's often a clue"
    • International Rock Gardener e-magazine
Re: Trough making
« Reply #26 on: January 26, 2018, 09:48:40 PM »
Just to point out that a lid can be glued onto a box and then a new opening cut in the top if a deeper trough is desired.

Glue to use is waterproof PVA. 
Margaret Young in Aberdeen, North East Scotland Zone 7 -ish!

Editor: International Rock Gardener e-magazine

bibliofloris

  • Jr. Member
  • **
  • Posts: 93
  • Country: us
Re: Trough making
« Reply #27 on: July 01, 2018, 05:16:51 AM »
I’ve been reading my way through Ian’s past Bulb Logs, and really enjoying that beautiful garden. Thanks for taking time to create them, Ian!

As I searched around and read about his slab raised beds (thanks for the construction links, Maggi! http://www.srgc.net/forum/index.php?topic=7850.msg214654#msg214654 ) and these fishbox troughs, I started to wonder: could the two be combined, using polystyrene insulation boards?

I’m guessing the foam/concrete wouldn’t be structurally sound for a raised bed, but what about a large planter or something? Has anyone made something larger than a fish box?

I love concrete, but would love lighter-weight options than really large slabs, if it mght work!
Kelly Jones
near Seattle, Washington state, USA (US zone 8b)

Ian Y

  • Bulb Despot
  • Administrator
  • Hero Member
  • *****
  • Posts: 2128
  • Country: scotland
  • Why grow one bulb when you can grow two:-))
    • Direct link to the Bulb Log SRGC
Re: Trough making
« Reply #28 on: July 01, 2018, 01:49:48 PM »
The largest trough I have made was using salmon sized boxes approx 850 x 550 x 150 but provided you get the concrete mixture correct there is no reason that you could not make them bigger.

The biggest objects I have made using cement and polystyrene was a series of standing stones for a garden the larg st was nearly 2m tall.
Ian Young, Aberdeen North East Scotland   - 
The person who says it cannot be done should not interrupt the person doing it.
https://www.srgc.org.uk/logs/index.php?log=bulb

bibliofloris

  • Jr. Member
  • **
  • Posts: 93
  • Country: us
Re: Trough making
« Reply #29 on: July 01, 2018, 04:16:41 PM »
Good to know — thanks, Ian!

If I try something large, I’ll report back here!
Kelly
Kelly Jones
near Seattle, Washington state, USA (US zone 8b)

 


Scottish Rock Garden Club is a Charity registered with Scottish Charity Regulator (OSCR): SC000942
SimplePortal 2.3.5 © 2008-2012, SimplePortal