We hope you have enjoyed the SRGC Forum. You can make a Paypal donation to the SRGC by clicking the above button

Author Topic: Log 3 - 30th August 2007 - Sand plunges  (Read 5222 times)

Andrew

  • Sr. Member
  • ****
  • Posts: 294
  • Trainee Croconut
Log 3 - 30th August 2007 - Sand plunges
« on: August 31, 2007, 05:55:37 PM »
A very interesting log this week Paul.

As I intend to build some plunges, a few more questions if you do not mind.

What is in the very bottom of the plunge, that's foot level and is there any bracing between the two walls to stop them bowing with all the weight of the sand and whatever else is in there ?
Andrew, North Cambridgeshire, England.

David Nicholson

  • Hawkeye
  • Journal Access Group
  • Hero Member
  • ******
  • Posts: 13117
  • Country: england
  • Why can't I play like Clapton
Re: Log 3 - 30th August 2007 - Sand plunges
« Reply #1 on: September 03, 2007, 08:27:56 PM »
Paul, it's great to see how the experts do it-what a cracking plunge. I too intend to 'convert' my small greenhouse to plunge beds so I am interested in your answer to Andrew's query although my 6' x 8' greenhouse will have a lot less area involved. I noted that you don't appear to have lined the inner faces of your concrete block surrounds (ie with polythene sheeting)- is there a possibility of unwanted lime leaching into the plunge material from the blocks or the mortar?
David Nicholson
in Devon, UK  Zone 9b
"Victims of satire who are overly defensive, who cry "foul" or just winge to high heaven, might take pause and consider what exactly it is that leaves them so sensitive, when they were happy with satire when they were on the side dishing it out"

Andrew

  • Sr. Member
  • ****
  • Posts: 294
  • Trainee Croconut
Re: Log 3 - 30th August 2007 - Sand plunges
« Reply #2 on: September 07, 2007, 08:09:12 AM »
Paul, I noted that you don't appear to have lined the inner faces of your concrete block surrounds (ie with polythene sheeting)- is there a possibility of unwanted lime leaching into the plunge material from the blocks or the mortar?

David, I had also thought about lining, but my thinking was to stop the water from inside the plunge affecting the walls !
Andrew, North Cambridgeshire, England.

art600

  • Travels light, travels far
  • Hero Member
  • *****
  • Posts: 2699
Re: Log 3 - 30th August 2007 - Sand plunges
« Reply #3 on: September 07, 2007, 09:54:43 AM »
The Wisley Alpine Log is a very welcome addition.  Look forward to seeing the new improved Alpine House next posting.

With regard to plunge beds, what sand do you use?  Do you fill those very deep beds completely with sand, or do you fill with anything, including the kitchen sink, to a level say 12 inches from the top?  If the latter, do you put a membrane to prevent the sand disappearing?
Arthur Nicholls

Anything bulbous    North Kent

Paul Cumbleton

  • Pleione Wizard
  • Hero Member
  • *****
  • Posts: 607
  • Country: gb
    • The Pleione Website
Re: Log 3 - 30th August 2007 - Sand plunges
« Reply #4 on: September 07, 2007, 09:50:03 PM »
Some very good questions here! Firstly on bracing - Andrew there are several possible ways to address this and looking at our plunges it seems over the years that all have been tried and each seems to have been successful. The longer plunges are actually divided into shorter lengths with blocks across the width to tie the two sides together. Others have had metal ties put across, while some have been built slightly sloping inwards so that any pressure is pushing them only back towards vertical. On small plunges of the size most amateurs would build I suspect that the blocks are strong enough not to need any extra bracing, but that's just a personal view.

David asks about lining. We haven't done this - as long as you get the kind of concrete blocks intended for outdoor use they will withstand moisture very well. I suppose you may get some leaching of lime or other salts from the blocks but we haven't observed this affecting the plants at all - I guess that every time we water, any lime etc is washed down into the bottom of the plunge.

Arthur, the sand we use is straightforward washed sharp sand that you can get at any builders merchant. The bottom of the plunges is filled with rubble, broken clay pots and your obligatory kitchen sink. This isn't actually necessary, it just fills some of the large volume more cheaply than using sand all the way down. Having said that, the sand is still pretty deep - our plunges are four blocks high and the rubble only comes up one and a half blocks, the rest is sand. Such deep plunges not only work well from the drainage point of view but mean we can plunge our longest long-tom pots up to the rim with ease. We haven't put a membrane between the rubble and sand but we did take care to wash sand into the voids and compact well at the bottom to avoid subsequent sinking of sand. I guess a membrane would be a good  if not better solution.

The new alpine house is now open and I'll reveal all in the next log which should be next Thursday!
Paul Cumbleton, Somerton, Somerset, U.K. Zone 8b (U.S. system plant hardiness zone)

I occasionally sell spare plants on ebay -
see http://ebay.eu/1n3uCgm

http://www.pleione.info/

 


Scottish Rock Garden Club is a Charity registered with Scottish Charity Regulator (OSCR): SC000942
SimplePortal 2.3.5 © 2008-2012, SimplePortal